Skip to content
Free shipping, delivered within 24-48* hours via BlueDart Express* Sale 500 discount on above 10,000 Purchase
Free shipping, delivered within 24-48* hours via BlueDart** Sale Discount

VIOFO Type-C HK4 Hardwire Kit with 8pcs Full Set Fuse for A329/A229/A119MINI2/A139/T130/WM1

by VIOFO
Save 38% Save 38%
Original price Rs. 3,999.00
Original price Rs. 3,999.00 - Original price Rs. 3,999.00
Original price Rs. 3,999.00
Current price Rs. 2,499.00
Rs. 2,499.00 - Rs. 2,499.00
Current price Rs. 2,499.00
Free Shipping

Free shipping for all orders above ₹ 999

Lowest Price

Offering the lowest Price in the Market

Local Shipping

Shipped from Chennai, India & Quick Delivery

1 Year Warranty

All Cameras come with a Warranty & Support

Authorized Store

Brand Authorised Store for Sales & Support

100% Satisfaction Guaranteed

Our Goal is Customer Satisfaction

Checkout securely with

  • HK4-C Hardwire Kit Cable For T130 3CH Dash Camera and A229 Dash Camera with Type-C USB Port
  • Two Suitable Fuse Tapes are included.
  •  HK4-C isn't compatible with Mini Port A119V3/A129 Duo/A129 Duo IR/A129 Pro Duo/A129 Plus Duo Dash Camera.
  • Buy HK3 for Viofo A119v3/A129 Series Dashcam Here: HK3
  • Buy HK3-C for Viofo A139 DashCam Here: HK3-C

Seamless Parking Mode Switching

With ACC detection, the dash cam seamlessly enters parking mode when the vehicle's engine is turned off and resumes normal recording once the vehicle is started.

Battery Discharge Prevention

Battery Discharge Prevention

The HK4 Hardwire Cable provides continuous power to your dashcam in parking mode until your car battery voltage drops to the configured threshold.

12V / 24V Compatible

The HK4 Hardwire Cable connects the camera directly to cars, trucks, buses, SUVs, or big rigs for continuous power. It accepts voltage from any vehicle running on 12–24V.

Tools Required

1. Multimeter
2. Needle-nose pliers
3. Fuse puller
4. Trim removal tool

1. Locate Your Fuse Box

Fuse box locations and types can differ between car models, years, and variants. Refer to the car manual for specific instructions.

2. Identify Battery & ACC fuses

To check fuse locations, use a multimeter on DC voltage after turning off the vehicle. 12V or 24V indicates Battery location, while 0V indicates ACC location.

3. Recheck the Fuses

With the ignition turned on, use the multimeter to test the Battery and ACC fuse positions identified in Step 2. Both should show a voltage of approximately 12V or 24V. If not, repeat Step 2.

4. Remove the Selected Fuses

Use a fuse puller to remove the fuses from the previously identified Battery and ACC positions.

5. Insert the Removed Fuses

Check the type of the removed fuses and confirm the correct fuse model. Then insert each fuse into the corresponding fuse tap.

6. Connect the Fuse Tap

Insert the metal strands of the hardwire cable into the metal tube of the fuse tap, then use needle-nose pliers to crimp the metal tube tightly.

7. Install the Fuse Tap

Insert the fuse tap back into the fuse box and secure it properly to ensure a stable connection.

8. Install the Ground Wire (Black)

Select a metal screw near the fuse box, loosen the screw, insert the Ground wire's metal terminal under the screw, and then tighten the screw securely.

9. Connect the Hardwire Cable

Connect the hardwire cable's Type-C plug into the power port on the top of the dashcam's GPS mount.

10. Test the Dash Cam

Start the vehicle to power on the dashcam. Enter the dashcam settings menu and enable Parking Mode. The parking mode icon will appear at the position on the left side of the screen.

11. Conceal the Wiring

Finally, follow the recommended wiring shown in the diagram below and use the trim removal tool to hide the hardwire cable.

Cable Connection

Product Diagram